- Does not require pre-wetting, tough adhesion properties will benefit from pre wetting soils.
- Not a blanketing product penetrates into the soils.
- Invisible after curing process thus landscape appears undisturbed.
- Soil penetration depths are a factor of viscosity, volume of solution and soil type.
- No extra solution required for cleaning the equipment used, can be cleaned with hot or cold water.
- Non hazardous to operators.
- Curing time ranges from 24 to 72 hours dependent on ambient temperatures, soil moisture content, soil temperature and relative humidity.
- Longevity of application (dependent on land use).
- Suitable to Indian climatic conditions and temperatures, as the recommended application temperature is above 700F.
- Storage at normal room temperature i.e. between 50 to 1000F.
- Reactivation by water by adding more solution if required.
- Captures dust which has migrated onto the treated surface after the initial application.
- Repair cracks in treated surface with solution and soil.
- Repair potholes in speedy manner, beneficial and economical.
- 1% of cement by weight of the total soil can be mixed to enhance compressive strength for mud/aggregate bricks.
Advantages of Soil Bond![](images/product/Road Protection/SoilBond/tm.jpg)
- Eliminates dust while reducing potholes and washboard ruts.
- Holds up against heavy wheeled traffic.
- Resurfaces through settled dust and re-activates by water (rain/manually).
- Road surface resembles the hardness of concrete.
- Lasts through heavy rains and flooding.
- Eco friendly, non toxic, non hazardous and water soluble (before curing).
Applications of Soil Bond
(1) Agriculture
If dust is an issue in your agricultural operation Soil Bond can sort it for you. From field roads, rain water storage for harvesting, shop areas, feed mills, crop duster, air strips, take-off or landing areas, feedlots, grain storage areas, driveways, office parking areas, canal areas or your rose garden Soil Bond can provide a solution to meet all your specific needs. It is non toxic, non hazardous, non corrosive properties Soil Bond is one of the most environment friendly products in its category available in the market today. Completely user friendly, Soil Bond equipment is effortless and with use of plain water.
(2) Construction
An environment friendly, user friendly and equipment friendly product, Soil Bond is a water soluble copolymer solution that penetrates the soil surface, surrounding dust particles by locking them into a layer of cured polymer. It is ideal for housing development, fugitive dust areas on road construction sites, maintenance areas, job site office parking areas, material stockpile areas and many other areas where dust is an issue of concern. The bricks made with Soil Bond can be used for low income housing by mixing 1% cement by weight of total soil.
(3) Industry
Soil Bond is designed to control periphery area dust at plant or manufacturing facility sites. Soil Bond can also be used to seal waste and material stockpiles, ultimately preventing fugitive dust from becoming air borne. The non toxic, non corrosive and non hazardous properties of Soil Bond make it an excellent choice for industries focused on worker health and safety.
(4) Military and Defense
Soil Bond is specifically developed for use in and around helicopter landing zones, hilly and muddy tracks where construction of roads is difficult or economically non viable. Soil Bond is easy to apply less time consuming, it's long term effectiveness and re-activation by water makes the product useful.
![](images/product/Road Protection/SoilBond/3.jpg)
(5) Mining
The cost of maintaining mining equipment is tremendous, coupled with regulatory limits on air quality and worker safety, the product provides the solution for the problem. Soil Bond helps and its non toxic, non hazardous, non corrosive water soluble nature controls dust while extending the equipment life thus lowering the maintenance costs. Soil Bond can be used to control and bind fugitive dust on material piles, mining roads, fueling stations and bone yards, parking areas as well as equipment maintenance areas.
(6) Roads
Soil Bond is a proven method to improve unpaved road, for road applications it is typically applied to the surface of the road but can also be mixed with aggregate or soil to provide a more solid surface after compaction. The volume of road traffic dictates the application rate, product longevity, as well as the need for re-activation which is done with water and Soil Bond .
![](images/product/Road Protection/SoilBond/2.jpg)
(7) Other Applications
- On sloppy tracks to stop erosion
- Desert Areas
- Canal Areas
- Parking lots
|